Introduction: SLQ-202 crude fiber tester is based on the principle of acid-base washing method, set acid, alkali treatment and washing in one, the use of fully enclosed electric heating, adding liquid, digestion, filtration, washing method to determine the crude fiber content. Samples do not need to be transferred during operation, the material can be broken out of crude fiber, so as to achieve accurate and rapid purpose. Applies to the determination of crude fiber, lignin, cellulose and hemicellulose content of food, feed, food and other agricultural and sideline products. In line with GB / T5515-2008, GB / T6434-2006 regulations. Features: 1. Automatic hand, flexible and convenient 2. Special semi-circular silicon carbide heater, heating fast and stable 3. Special suction pump, fiber check patented product, suitable for all corrosive solvents 4. Auto-injection is up to 5 times more efficient than traditional free-fluid additions 5. Acidic water automatically thermostat, separate control, over-temperature protection 6. Unique valve island design, to ensure stable and smooth operation of the instrument 7. Backflush function, suction filtration more smoothly 8. 7-inch ultra-thin color screen, clear and simple interface avant-garde fashion 9. Touch screen control, external no control button 10. Heater in place detection Technical Parameters: 1. mode: hand automatically one; 2. Test range: 0 ~ 100%; 3. The number of samples: a test at the same time 1 to 6 samples; 4 sample weighing: 0.5 ~ 3.0g; 5. Test accuracy: repeatability ≤ 0.4%; 6. Test time: ≤ 60min on the instrument. ; 7. Heating method: mobile semi-circular silicon carbide heater; 8. Temperature control accuracy: ± 0.1 ℃; 9. Temperature control mode: 6 stages of automatic temperature step-by-step; 7-inch color touch-screen control; 10. Dosing method: automatic injection, preheating temperature, over-temperature protection; 11. Power: 220V ± 10%, 50 ~ 60HZ; 12. Rated power: 1600W; 13. Dimensions (mm): Host 560 × 460 × 550; (anti-dry) cooker 550x160x220; 14. Weight: 45kg;
Introduction: SLQ-202 crude fiber tester is based on the principle of acid-base washing method, set acid, alkali treatment and washing in one, the use of fully enclosed electric heating, adding liquid, digestion, filtration, washing method to determine the crude fiber content. Samples do not need to be transferred during operation, the material can be broken out of crude fiber, so as to achieve accurate and rapid purpose. Applies to the determination of crude fiber, lignin, cellulose and hemicellulose content of food, feed, food and other agricultural and sideline products. In line with GB / T5515-2008, GB / T6434-2006 regulations.