Position: Home > > Lab general equipment > Refrigeration equipment > Freeze drying machine > Pilot10-15 Pro Vacuum Freeze Dryer

Pilot10-15 Pro Vacuum Freeze Dryer

Product ID:SYZLdgj026

Price: Please inquire PDF Format
Supply Ability:60 SETS/MONTH
Port:SHENZHEN
share:
  • Product Introduction
  • Consulting
  • Model NumberPilot10-15 Pro
    Brand NameBYK
    Payment TermsT/T, paypal
    Introduction:
    Pilot Pro series full-function vacuum freeze dryer, dedicated to bio-gene engineering, pharmaceutical, medical. Suitable for drying water-soluble solutions, suspensions or pastes with a eutectic point temperature above -40 °C. This model is suitable for process optimization and exploration of freeze-dried samples.
    Features:
    1. The freeze-drying box door is made of all stainless steel (SUS304 material), which is opaque and prevents radiant heat from interfering with product sublimation.
    2. The inner surface of the freeze-drying box is made of black coating in accordance with GMP standards, which absorbs light and prevents diffuse reflection.
    3. The inside of the freeze-drying box and the sealing part are made of special materials, which can withstand the corrosion of volatile organic compounds, acidic and alkaline gases.
    4. Double refrigeration system, one for use, safe and efficient.
    5. Double vacuum system, one for use, safe and efficient.
    6. Configure the eutectic point tester to facilitate the development of freeze-drying process.
    7. Layer pre-freezing function.
    8. Brand compressor, stable and low noise.
    9. Brand vacuum pump, high pumping speed and low noise.
    10. Configure the imported hydraulic system, the plug is stable and safe.
    11. Standard oil mist filter to avoid the poison of oil mist on the human body when vacuuming.
    12. It can be stored after drying with nitrogen or inert gas.
    Technical Parameters:
    Model: Pilot3-6 Pro
    Freeze-dried area: 0.42m2
    22 Westing bottle capacity (20ML): ≥900
    16 Westing bottle capacity (5ML): ≥1700
    Cold trap temperature (no load): -85 ° C
    Cold trap cooling rate (no load): 20 ° C - 60 ° C ≤ 5 minutes
    Vacuum degree (no load): <1Pa
    Laminar temperature (no load): ≤ -55 ° C
    Plate cooling rate (no load): 20 ° C - 40 ° C ≤ 25 minutes
    Laminate cooling method: silicone oil circulation
    Number of layers: 3+1
    Laminate size (mm): 350*400
    Water catching capacity: 6L
    Freeze-drying efficiency: 3L/24H
    Laminar spacing: 100mm
    Freeze-dried curve fit: 100%
    Plug: hydraulic plug
    Refrigeration safety protection: One use, one problem, the problem occurs, the standby unit is put into operation
    Vacuum safety protection: One use, one problem, the problem occurs, the standby unit is put into operation
    Machine size (approx): W860*D1600*H1800

  • Introduction:
    Pilot Pro series full-function vacuum freeze dryer, dedicated to bio-gene engineering, pharmaceutical, medical. Suitable for drying water-soluble solutions, suspensions or pastes with a eutectic point temperature above -40 °C. This model is suitable for process optimization and exploration of freeze-dried samples.
Products
Analytical instruments
Physical property test
Environmental monitoring and analysis
Lab general equipment
About us
About this website
Our service
Product purchase
Contact Us

Newsletter

Make Sure you dont miss interesting happenings by joining our newsletter program.

Contact Us
18620722006
instruments@instrumentstrade.com