Position: Home > > Lab general equipment > Heating / drying equipment > Experimental furnace > NBD-O1200-50ITY-80 rotary tube furnace

NBD-O1200-50ITY-80 rotary tube furnace

Product ID:SYJRGZsyl040

Price: Please inquire PDF Format
Supply Ability:20SETS/MON
Port:SHENZHEN
share:
  • Product Introduction
  • Consulting
  • Model NumberNBD-O1200-50ITY-80
    Brand NameNUOBADI
    Payment TermsT/T, paypal
    NBD-O1200-50ITY-80 rotary tube furnace
     
    Introduction:
    This product is suitable for handling materials that require only a short heating time. The rotary tube furnace is slightly tilted, heating is started to reach the target temperature, and then the feed reamer is opened to continuously feed the material into the furnace tube, and the material passes through the heating zone of the working tube and is discharged from the other end. The length of the heat treatment depends on the inclination of the tube, the rotational speed, the length of the tube, and the fluidity of the material. The 6L storage container, combined with the closed inlet and outlet system, can also be used in a protective atmosphere or vacuum (if the sintering temperature is too high).
    Features:
    1. The furnace tube is made of 310 heat-resistant stainless steel to increase the operating temperature of the equipment;
    2. Adopt PLC centralized control device to simplify operation, real-time display of various data, intuitive and clear;
    3. Closed inlet and outlet system to realize vacuum sintering of atmosphere sintering goods;
    4. Set various alarm functions to achieve unattended sintering;
    5. There is a material level monitor for monitoring the material condition, and a vibrator is added to facilitate better material introduction.
    Technical Parameters:
    Model: NBD-O1200-50ITY-80
    Maximum temperature: 1200
    Dimensions mm Long and deep:
    Pipe diameter (outer) mm: Φ50
    Tube length mm: 1630
    Heating zone length mm: 900
    Constant temperature zone mm: 700
    Power: 380V/8kw
    Weight Kg (about): 50
  • Introduction:
    This product is suitable for handling materials that require only a short heating time. The rotary tube furnace is slightly tilted, heating is started to reach the target temperature, and then the feed reamer is opened to continuously feed the material into the furnace tube, and the material passes through the heating zone of the working tube and is discharged from the other end. The length of the heat treatment depends on the inclination of the tube, the rotational speed, the length of the tube, and the fluidity of the material. The 6L storage container, combined with the closed inlet and outlet system, can also be used in a protective atmosphere or vacuum (if the sintering temperature is too high).
Products
Analytical instruments
Physical property test
Environmental monitoring and analysis
Lab general equipment
About us
About this website
Our service
Product purchase
Contact Us

Newsletter

Make Sure you dont miss interesting happenings by joining our newsletter program.

Contact Us
18620722006
instruments@instrumentstrade.com