Introduction: SKT series mechanical impact tester is mainly applied to the impact test of electronic products, aerospace, shipbuilding, military industry, auto parts, transportation and other fields. By selecting different waveform generators, impact tests like half sine wave, post-peak sawtooth wave or square wave can be performed. Equipment meets: GB/T2423-2008, GJB150, GJB360, GJB548, GJB1217, MIL-STD-202F, IEC-68-2-27, MIL-STD-810F, MIL-STD-883E and other test specifications. The system is compliant with MIL-STD-810, GJB-150-18-86 and IEC68-2-27 standards. It has accurate and fast impact waveform capture capability. The highest sampling rate is up to 1MHz. You do not need to worry about even the smallest ones. The impact was missed. It is also an integrated solution. You don't have to be busy with waveform viewing and recording. It can be done from capturing impact events to generating reports. More importantly, it also provides you with Shock Response Spectrum (SRS) analysis capabilities. , can help you to effectively evaluate the potential damage to the actual system by the shock pulse. Finally, assisted analysis of force deformation, impact response, etc. can help you understand more details of the impact results. Features: 1 Complies with MIL-STD-810, GJB-150-18-86, IEC68-2-27, DELL standards 2 highest sampling frequency up to 1MHz 3 maximum test acceleration 100,000gn 4 minimum test pulse width 0.1ms 5 multi-frame waveform recording and playback 6 support internal and external trigger Technical Parameters: Working platform: 350×350 mm Maximum load: 25KG Peak acceleration: Half sine wave 600G Pulse duration: Half sine: 1---30 ms Acceleration tolerance: Within ≤10% Speed change: ≤10% Countertop horizontal ratio: ≤10% Equipment size: 1300×1150×2550mm Total equipment: 1900 kg measuring system Input channel: 2 channels Sampling frequency: 192KHz Pulse Duration: 0.5-100ms Acceleration: 5000G Communication Interface: USB2.0 Supporting standards: ISO, MIL-STD-810, user-defined Operating System: Microsoft Win XP Output method: Charge type Sensitivity: 3.93pC/g Frequency range: 0.5---12KHz Acceleration range: ±2500G Working environment: -40~+160°C other instructions Power supply: AC3 phase 380V±10%5KVA Compressed air: 0.5-0.8Mpa Temperature: RT～40°C Humidity: 25°C<85RH%
