MF260D laboratory blown film machine Introduction: This machine is used with plastic extruder main machine and plastic auxiliary machine. It can be used to manufacture PE plastic film for laboratory. Technical Parameters Host Screw diameter: 20mm Screw length to diameter ratio: 28:1 Screw speed: 40-80r/min Production capacity: 1-2Kg/h Main motor power: 2.2Kw (frequency control) Speed: 1480r/min Voltage: 380V Center height: 300-350mm Body heating: heating method resistance heater Number of heating sections 3 Total heating power 1.0Kwx3 (220V) Cooling of the fuselage: 0.6Kw Die: die diameter 25 (for blown thin film) Heating method Number of heating sections 2 Total heating power 1.0+1.0Kw (220V) Wind Ring: Model 400 Fan Power 0.55KW Auxiliary machine 1. Upper traction center height: 1400mm 2, the upper traction motor power: 0.37KW (frequency control) 3. Upper traction roller diameter: φ80 4, traction roller width: 160 5, the next winding motor: 10KG (torque motor) 6, the highest traction line speed: 20m / min Dimensions (length X width X height): 2500X800X1500 Electrical control and operation cabinet: Dimensions 600*300*1500
Introduction: This machine is used with plastic extruder main machine and plastic auxiliary machine. It can be used to manufacture PE plastic film for laboratory.
