Position: Home > > Industrial on-line and process control > Other industrial on-line analyzer > MD-UF split type ultrasonic level gauge

MD-UF split type ultrasonic level gauge

Product ID:ZXQT057

US$0.00 ~ US$1.00 PDF Format
Supply Ability:80SETS/MON
Port:SHENZHEN
share:
  • Product Introduction
  • Consulting
  • Brand NameSHANGHAIMINGKONG
    Payment TermsT/T, paypal
    Model NumberMD-UF
    MD-UF split type ultrasonic level gauge
    Introduction
    The MD-UF split type ultrasonic level gauge is a convenient and suitable split type ultrasonic level meter, which solves the worries of the fault that the integrated circuit in the harsh environment is prone to failure. It has the advantages of accurate measurement, reliable operation and generous appearance.
    This series of ultrasonic level gauges uses large-scale integrated circuits to ensure long-term reliability of the products. At the same time, its power consumption is reduced to a very low level. The large-screen display full Chinese menu is easy to use, supports SD card data acquisition and serial data download, and can record ten interference echo points.
     
    Feature
    ☆Optional 4-20mA/RS485 and other output methods
    ☆Can add GPRS wireless output
    ☆ backup and restore settings parameter function
    ☆ can adjust the analog output arbitrarily
    ☆With digital filtering and echo recognition
    ☆ Manually set fixed interference filtering function
    ☆ Support for custom serial data format
    ☆Support for custom math function operations
    ☆Support MiniSD card data acquisition, USB output, micro printer (selected when ordering)
     
    Technical Parameters
    Range measurement: 2m, 5m, 8m, 10m, 12m, 15m, 20m, 25m, 30m (selected when ordering);
    Blind zone: 0.3-1.5m (different from range)
    Emission angle: less than 12° (different from sensor)
    Ranging accuracy: ±0.3% F.S
    Display: Chinese and English large screen LCD, color screen TFT (optional)
    Minimum display resolution: 1mm
    Temperature compensation: automatic temperature compensation
    Operating frequency: 20 KHz ~ 200KHz (depending on model specifications)
    Live setting: completed by local button
    Calibration: factory calibration, field calibration
    Automatic switching between Chinese and English
    Output (selected when ordering)
    Analog signal output: 4 ~ 20mA (standard), 0 ~ 20mA, 0 ~ 5V, 0 ~ 10V
    Digital communication: RS485, HART protocol, GPRS, MiniSD card data acquisition, USB
    4-channel relay output: relay contact capacity: AC: 5A 250V DC: 10A 120V
    Working voltage: AC220V or DC12-24V
    Power consumption: <5W
    Mainframe dimensions: 240mm × 184mm × 110mm / 256mm × 175mm × 110mm
    Host material: ABS engineering plastic / cast aluminum
    Sensor cable: 10m shielded cable (can be customized to any length)
    Transducer material: ABS engineering plastic, nylon
    Sensor dimensions: Φ65mm × 119mm × G1 1/2 (2m range)
                               Φ74mm×137mm×M60 (5m-15m range)
                               Φ110mm×194mm×M30 (20m-30m range)
    Sensor mounting interface: G1 1/2 (2m range)
                               M60×2 (5m-15m range)
                               M30X1.5 or DN80 non-standard flange (20m-30m range)
    Protection level: IP65 (can be customized with higher protection level)
    Explosion-proof grade: EXiaII BT4Gb (selected when ordering)
    Working environment: normal temperature / normal pressure
    Storage humidity: ≤80%RH without condensation

Products
Analytical instruments
Physical property test
Environmental monitoring and analysis
Lab general equipment
About us
About this website
Our service
Product purchase
Contact Us

Newsletter

Make Sure you dont miss interesting happenings by joining our newsletter program.

Contact Us
18620722006
instruments@instrumentstrade.com