Introduction: SW-30 series pneumatic horizontal impact test system for impact testing of products in the horizontal direction. It is mainly used for the simulation of impact environments such as optoelectronic systems that cannot be inverted, and horizontal emission tests for slender products. Features: 1 impact table with longitudinal impact, high stiffness in the longitudinal direction, high frequency clutter; 2 reliable air brake technology to prevent the secondary rebound of the table; 3 All use low pressure cylinder as power, safe and reliable, and easy to maintain; 4 For large horizontal impact tables, a gas-liquid cushioning device was designed, which greatly reduced the impact on the base and the ground and improved the service life of the equipment. 5 The expansion cylinder is used as power, and the impact overload value is controlled by adjusting the air pressure, which is quick and convenient, and the impact repeatability is good; 6 Impact table control and measurement integration facilitates operation and measurement. Technical Parameters: Article number: SW30-50 Rated load (kg): 50 Table size (mm): 600×320 Shock waveform: 1 half sine wave Peak acceleration: (m/s2) 100 to 6000 Pulse duration (ms): 60-0.5 2 rear peak sawtooth Peak acceleration (m/s2): 100 to 2000 Pulse duration (ms): 18~3 3 trapezoid Peak acceleration (m/s2): 150 to 1000 Pulse duration (ms): 18~6 Base size (mm): 2200×630 Table body weight (kg): 1500
