Position: Home > > Physical property test > Thermal analysis instrument > Thermal conductivity meter > JH-I-7 Carbon Material Thermal Conductivity Tester for Carbon material testing

JH-I-7 Carbon Material Thermal Conductivity Tester for Carbon material testing

Product ID:WLrd023

Price: Please inquire PDF Format
Supply Ability:50 SETS/MON
Port:SHENZHEN
share:
  • Product Introduction
  • Consulting
  • Model NumberJH-I-7
    Brand NameXIANGTANJINGHANG
    Payment TermsT/T, paypal
    JH-I-7 Carbon Material Thermal Conductivity Tester
     
    Introduction:
    The product of JH-I-7 carbon material thermal conductivity tester is based on the standard: ISO12987-2000 YS/T63.3-2006, which is used to test the thermal conductivity of carbon materials. The instrument consists of a hot plate and its power adjustment system, a cold plate and its constant temperature system, a sample preheater, and a sample hot and cold surface testing system.
    technical parameter:
    1. Measuring table: hot plate and cold plate, working surface diameter Φ60.
            Hot plate: built-in heater, use high-precision T-type thermocouple thermometer to control its temperature at 60±0.1
            Cold plate: built-in circulating water channel, use high-precision thermocouple thermometer to control its temperature at 20±0.1
    2. The sample preheater can be equipped for preheating the sample, and the preheating temperature is controlled at 40
    3. Thermostat: cooling/heating thermostat. The amount of heating and cooling is automatically selected by the electronic controller.
               The temperature of the cooling water is controlled at 20±0.5°C.
    4. Temperature measurement system: Use differential thermopile or high-precision thermocouple thermometer to measure the temperature difference between the cold surface and the hot surface of the sample, with an accuracy of ±0.1
    5. Sample size measurement: use a digital caliper with an accuracy of 0.01mm, Φ50*50mm
    6. The measurement time is 5-20 minutes;
    7. It can be equipped with automatic pre-compression and manual pre-compression to keep constant pressure on the sample contact surface. Gas pressurization, limit 6MPA
    8. The power is not more than: 1.5KW
  • Introduction:
    The product of JH-I-7 carbon material thermal conductivity tester is based on the standard: ISO12987-2000 YS/T63.3-2006, which is used to test the thermal conductivity of carbon materials. The instrument consists of a hot plate and its power adjustment system, a cold plate and its constant temperature system, a sample preheater, and a sample hot and cold surface testing system.
     
Products
Analytical instruments
Physical property test
Environmental monitoring and analysis
Lab general equipment
About us
About this website
Our service
Product purchase
Contact Us

Newsletter

Make Sure you dont miss interesting happenings by joining our newsletter program.

Contact Us
18620722006
instruments@instrumentstrade.com