Position: Home > > Physical property test > Testing machine > Impact table > JBDW-YD Automatic Low Temperature Impact Tester

JBDW-YD Automatic Low Temperature Impact Tester

Product ID:WSHcjt010

Price: Please inquire PDF Format
Supply Ability:20SETS/MON
Port:SHENZHEN
share:
  • Product Introduction
  • Consulting
  • Model NumberJBDW-YD
    Brand NameJNPY
    Payment TermsT/T, paypal
    Introduction:
    JBDW-Y/D microcomputer controlled automatic low temperature impact testing machine is a new generation of high-tech products developed by our company in strict accordance with GB/T3808-2002 and GB/T229-2007. According to JJG145-2007 "pendulum impact testing machine verification procedures In the factory inspection, the impact testing machine is a microcomputer-controlled fully automatic low-temperature impact testing machine, which is used to test the impact resistance of metallic materials under dynamic load. It is an indispensable testing instrument for metallurgical machinery manufacturing and other units, and also a research institute. Indispensable test equipment for new material research.
    Features:
    1. Take the imported PLC controller as the core of the electrical control system, and adopt high-precision optical encoder as the angle acquisition sensor.
    2, integrated circuit board, maintenance and more simple.
    3. Replace the old-fashioned clutch with the brush clutch. During the test, the pendulum automatically takes the pendulum, effectively protecting the clutch, reducing system damage to the clutch and prolonging the system life.
    3. Advanced host structure technology design, host base and column with a new design packaging, beautiful appearance, solid and durable, reasonable structure.
    4. The highly rigid pendulum prevents the pendulum from shaking after impacting the sample.
    5. The use of standard turbine reducer, high efficiency, completely avoid the transmission failure.
    6. Modular structure, reducing the processing and assembly process, greatly improving the accuracy of the host.
    7. Replace the old-fashioned mechanical limit switches with photoelectric proximity switches to improve the stability of the equipment and keep the pre-lift angle constant.
    Technical Parameters:
    Impact energy: 300J
    Impact energy range: 0-150J/0-300J
    Angle resolution: ≤0.1°
    Dial per grid division: 1J/2J
    Pendulum force value (impact constant): 0-150J 0-300J
    M=80.3848N.m M=160.7695N.m
    Pendulum lifting angle: 150°
    Swivel axis rotation center to impact point (sample center) Distance: 750mm
    Impact speed: 5.2m/s
    Specimen support span: 40mm
    Jaw fillet: R1-1.5mm
    Impact blade radius: R2—2.5mm
    Sample box capacity
    Specimen size: 55×10×10mm
    Tester net weight: 450kg
    Test Machine Dimensions: 2124×600×1340mm
    Power supply: Three-phase four-wire system 50Hz, 380V, 180W (main motor)
    Angle resolution: ≤0.03°
    A/D conversion: 24 bits
    Sample rate: ≤20ms

     
     
  • Introduction:
    JBDW-Y/D microcomputer controlled automatic low temperature impact testing machine is a new generation of high-tech products developed by our company in strict accordance with GB/T3808-2002 and GB/T229-2007. According to JJG145-2007 "pendulum impact testing machine verification procedures In the factory inspection, the impact testing machine is a microcomputer-controlled fully automatic low-temperature impact testing machine, which is used to test the impact resistance of metallic materials under dynamic load. It is an indispensable testing instrument for metallurgical machinery manufacturing and other units, and also a research institute. Indispensable test equipment for new material research.
Products
Analytical instruments
Physical property test
Environmental monitoring and analysis
Lab general equipment
About us
About this website
Our service
Product purchase
Contact Us

Newsletter

Make Sure you dont miss interesting happenings by joining our newsletter program.

Contact Us
18620722006
instruments@instrumentstrade.com