HWP30-10S self-accelerated decomposition temperature tester (isothermal type) Introduction
HWP30-10S self-accelerated decomposition temperature tester is used to determine the heating rate of reaction or decomposition substance over time at constant temperature. The measured heating parameters are used in conjunction with the heat loss data of the package to determine the self-accelerating decomposition temperature of the substance in its container. HWP30-10S self-accelerating decomposition temperature tester complies with the United Nations Recommendations on the Transport of Dangerous Goods-Manual of Tests and Standards 28.4.3 Test H.3: Isothermal storage test.
Feature
1) Embedded processor, Windows CE operating system;
2) 8-inch LCD touch screen, which can display test status in real time;
3) Built-in aluminum soaking block to ensure the uniformity and stability of furnace temperature and improve the sensitivity of heat flow detection;
4) Digital PID algorithm accurately controls the heating temperature, and the temperature control accuracy is high;
5) With a cooling system, the test furnace body can be quickly cooled for easy operation;
6) The auxiliary safety device performs overheating protection and automatically cuts off the heating system at a predetermined temperature;
7) Automatic fault detection and audible and visual alarm functions to ensure safer testing;
8) Real-time display of running time, real-time temperature and heat flow, automatic drawing of test curves, and viewing of raw data;
9) Diversified test options, users can configure corresponding test parameters according to the characteristics of the sample;
10) The test process is fully automated without manual intervention, and supports parameter setting, data storage, and viewing reports.
Technical Parameters
Working environment: 5 ℃ ～ 30 ℃, <85% RH
Temperature control range: -20 ℃ ~ 200 ℃
Temperature control stability: ± 0.2 ℃
Temperature measurement range: -30 ℃ ~ 250 ℃
Temperature display resolution: 0.1 ℃
Temperature measurement accuracy: ± 0.5 ℃
Heat flow meter sensitivity: 50µV / mw
Sample container volume: 70ml
HWP30-10S self-accelerated decomposition temperature tester is used to determine the heating rate of reaction or decomposition substance over time at constant temperature. HWP30-10S self-accelerating decomposition temperature tester complies with the United Nations Recommendations on the Transport of Dangerous Goods-Manual of Tests and Standards 28.4.3 Test H.3: Isothermal storage test.
