Introduction: The infrared inoculation loop sterilizer can sterilize new high-temperature sterilization equipment such as inoculation loops, inoculation needles, tweezers, and small scissors. Its simple operation, no open flame, no turbulence, is a necessary small sterilization equipment for purification workbenches and biological safety cabinets. It is not afraid of wind, is safe to use, and can be used in environments such as exhaust fans, mobile cars, etc.; it does not consume oxygen during work, and can be used for microbiological experiments in anaerobic chambers. Principle: Items to be sterilized can be sterilized by placing them in a high-efficiency ceramic infrared heating tube with a temperature of up to 800°C and burning them at a high temperature for 5 to 7 seconds. Features: 1) Set the sterilization temperature by yourself: The infrared inoculation loop sterilizer has a digital display electronic panel, and the sterilization temperature can be set according to the experimental requirements, and the current sterilization temperature value can be displayed in real time to ensure the sterilization effect; and different temperatures can be tested Under the sterilization effect, an optimal sterilization temperature that can not only achieve the sterilization purpose but also effectively reduce the energy efficiency is obtained. 2) The instrument has a built-in microcomputer intelligent temperature controller: The infrared inoculation loop sterilizer has self-tuning PID technology, accurate temperature control, and fast response. Due to the temperature control function, it will automatically stop heating when the temperature reaches the set temperature, reducing electricity Consumption, prolong the life of the heating tube, high efficiency, energy saving and environmental protection. 3) High-efficiency ceramic infrared heating tube: Long service life, ashing organic matter in the depth of the ceramic funnel pipe to prevent infectious splashing and cross-contamination. 4) Applicable to various experimental environments: The infrared inoculation loop sterilizer is safe and convenient to operate, without open flames, and when used in biological safety cabinets and clean benches, it will not cause airflow turbulence in the operating area, because there is no need to consume oxygen during use. Microbiological experiments are carried out in an anaerobic chamber, which effectively improves the efficiency of the experiment. 5) Humanized design: The ergonomic sampling design of the infrared inoculation loop sterilizer fully embodies the human-oriented concept of science and technology. Small in size and light in weight, the shell is made of 304 stainless steel, corrosion-resistant, beautiful, and easy to clean. Technical Parameters: Model: HKM-9802B Total length of sterilization zone: 100mm Maximum outer diameter of sterilized items: ≤φ53mm The highest temperature in the central area: 800℃ Temperature control range of heating zone: RT+5～800℃ Temperature control accuracy: ±15℃ Heating time: 750℃＜20min Power: 410W Power supply: AC 220V±15% 50Hz Maximum product size: 170*105*280mm Net weight: 1.48kg
Introduction: The infrared inoculation loop sterilizer can sterilize new high-temperature sterilization equipment such as inoculation loops, inoculation needles, tweezers, and small scissors. Its simple operation, no open flame, no turbulence, is a necessary small sterilization equipment for purification workbenches and biological safety cabinets. It is not afraid of wind, is safe to use, and can be used in environments such as exhaust fans, mobile cars, etc.; it does not consume oxygen during work, and can be used for microbiological experiments in anaerobic chambers. Principle: Items to be sterilized can be sterilized by placing them in a high-efficiency ceramic infrared heating tube with a temperature of up to 800°C and burning them at a high temperature for 5 to 7 seconds.
