DZY-002ZII Fully Automatic Closed Flash Point Tester Features
1. The control system of the instrument adopts advanced PLC (programmable logic controller) as the control core. Compared with similar instruments that use single-chip microcomputer as the core, it has great advantages in stability and accuracy. Another: PLC is also often used in machinery with very low failure rate requirements, such as carrier rockets.
2. The instrument has a high degree of automation and only needs to be pressed once. The entire experiment process can be completed by itself (mainly including: automatic lifting of the sample cup lid, automatic heating of the experimental sample, automatic ignition, automatic detection and automatic judgment of the flash point, automatic measurement of real-time atmospheric pressure, Automatically print the experimental results after calibrating atmospheric pressure, etc.). It also has the functions of storing, printing and downloading experimental results.
3. The instrument is equipped with a 7-inch full-color, high-performance, high-definition TFT LCD touch screen, which is very sensitive to touch. All the operation and data display of the instrument can be realized on the touch screen, and the layout of the touch screen adopts humanized design, and the functions are clear at a glance.
4. The stirring device of the instrument adopts a special stepping motor, the stirring rate is stable, and it can be adjusted freely.
5. The instrument has a built-in atmospheric pressure sensor, which can automatically obtain real-time atmospheric pressure and calibrate the corresponding experimental results.
6. The instrument is equipped with automatic cooling function, which can effectively shorten the waiting time of the next experiment.
7. The instrument can install LIMS system according to user's demand. Technical parameters
1. Instrument power supply: AC220V ± 10% 50H
2. Measuring range: 40 ～ 300 ℃
3. Sensor accuracy: 2 ‰
4. Flash point detection: micro thermocouple
5. Heating rate: Method A: 5 ～ 6 ℃ / min Method B: 1 ～ 1.5 ℃ / min
6. Heater power: 600W
7. Stirring speed: Method A: 90 ～ 120r / min Method B: 240 ～ 260r / min
8. Gas source: LPG, propane
9. Overall dimensions: 240 × 410 × 39 (mm)
DZY-002ZII automatic closed flash point tester has a built-in atmospheric pressure sensor, which can automatically obtain real-time atmospheric pressure and calibrate the corresponding experimental results. The DZY-002ZII automatic closed-end flash point tester uses the Pensky-Martin closed-cup method to determine the flash point of combustible liquids such as diesel fuel, liquids with suspended particles, liquids that form films on the surface area under test conditions, and others.
