Introduction: Adsorption tube aging instrument as thermal analyzer equipment, is mainly used to aging adsorption tube. Adsorption tube After analyzing the sample, there will be a certain amount of sample residue in the tube. It needs to be aged through the aging instrument to ensure the minimum residue of the adsorption tube and prepare for the next sampling. DTC-120 aging instrument can not only remove the residue in the adsorption tube, but also can age 12 tubes at the same time. At the same time, the user can select the mode of gas-saving according to the number of samples, which greatly improves the working efficiency of the operator and reduces the operation of the instrument cost. Applications: environmental monitoring, occupational health, quality control hospital, exit and entry, Academy of Building Research, measurement institutes, universities and research institutes, third-party testing and automotive testing industries. Features: 1. At the same time aging 12 sample tubes, the maximum temperature ≥ 400 ℃; 2. With gas-saving mode, according to the number of sample tubes, you can choose one carrier gas or two carrier gas; 3. Sample tube protection, no carrier gas or carrier gas is too low, automatically stop heating; 4. High temperature protection, the temperature exceeds the safety threshold, automatically cut off the power to stop heating; 5. Brand temperature controller, accurate temperature control, temperature control accuracy of ± 0.1 ℃; 6 needle flow control, each sample hole can be independently adjusted flow; 7. Simple operation, just set the temperature and time, one-click auto-complete; 8. Adsorption tube plug easy, without any tools; 9 heating speed, 5 minutes from normal temperature rose to 320 ℃; 10. After the completion of automatic cooling temperature aging, 10 minutes can be reduced from 320 ℃ to 70 ℃.
Introduction: Adsorption tube aging instrument as thermal analyzer equipment, is mainly used to aging adsorption tube. Adsorption tube After analyzing the sample, there will be a certain amount of sample residue in the tube. It needs to be aged through the aging instrument to ensure the minimum residue of the adsorption tube and prepare for the next sampling. DTC-120 aging instrument can not only remove the residue in the adsorption tube, but also can age 12 tubes at the same time. At the same time, the user can select the mode of gas-saving according to the number of samples, which greatly improves the working efficiency of the operator and reduces the operation of the instrument cost. Applications: environmental monitoring, occupational health, quality control hospital, exit and entry, Academy of Building Research, measurement institutes, universities and research institutes, third-party testing and automotive testing industries.
