Position: Home > > Life science instrument and equipment > Biological engineering equipment > Filtration system > DS series self-cleaning Y type filter

DS series self-cleaning Y type filter

Product ID:SHGCglxt043

Price: Please inquire PDF Format
Supply Ability:20SETS/MON
Port:SHENZHEN
share:
  • Product Introduction
  • Consulting
  • Brand NameAHFLTGLXT
    Payment TermsT/T, paypal
    Model NumberDS
    Description:
    1.DS series has four structural forms: Y, F, L and T.
    2. Single filter flow is 25-9300t/h.
    3. Pipe diameter: DN50 ~ DN1200mm.
    4. Design pressure: 1.0mpa, 1.6mpa, 2.5mpa and 4.0mpa.
    5. Filtering precision ranges from 100 microns to 5,000 microns.
    6. Filter area: 1500cm2 ~ 75000cm2.
    7. Cleaning control: pressure difference, time and manual.
    8. Simple cleaning method, electric brush type.
    9. The amount of water discharged during cleaning is very small, less than 1% of the total filtration amount.
    Working principle:
    DS series electric brush filter is a fully automatic cleaning filter. A set of brushes are installed in the filter screen. The brushes are driven by the motor and a electromagnetic blowdown valve is installed on the end cover of the filter. When cleaning, the signal from the pressure difference switch is sent to the control panel. The control panel opens the drain valve and starts the motor at the same time, drives the brush to rotate and brush off the dirt and impurities. Under the action of hydraulic power, the filter is discharged through the drain valve. No cut off in cleaning.
    Application scope:
    1. Cooling water treatment -- water filtration in cooling tower, supplementary water system, air conditioning system and dc system to reduce the generation of sediment in the heat exchanger and maintain its cooling effect.
    2. Raw water treatment -- it can filter surface rivers, lakes, seawater, reservoir water, well water and groundwater, and remove sand, bacteria, algae, organics and so on.
    3. Industrial recycling water filtration -- in the equipment with certain requirements on water quality, such as cooling tower, rolling mill, continuous casting machine, polishing, water pump, electromagnetic valve, ion exchanger, sprayer, heat exchanger, etc. or water supply and drainage pipeline, impurities in water can be filtered to avoid blockage of pipeline, nozzle and other parts.
    4. Irrigation -- especially suitable for water sources with high flow and impurities, such as agricultural irrigation, sprinkling irrigation, parks, golf courses and sod irrigation, etc.
    5. Paper industry - white water filtration
    6. Plastics industry -- product recycling and cooling water filtration.
Products
Analytical instruments
Physical property test
Environmental monitoring and analysis
Lab general equipment
About us
About this website
Our service
Product purchase
Contact Us

Newsletter

Make Sure you dont miss interesting happenings by joining our newsletter program.

Contact Us
18620722006
instruments@instrumentstrade.com