Introduction: This tester is mainly used as a cement plant, construction and construction unit and institutions of professional institutions, scientific research units to do the cement soft training mortar strength test, and can be used as other non-metallic brittle materials flexural strength test. This tester can be used with single lever and double levers. The maximum output when the single lever is used is 1000N, and the maximum force when the double lever is used is 5000N. The scale of the tester has the conversion scale for the flexural strength and resistance of cement soft-formed rubber sand, and the maximum output. For 1000 N, the reading accuracy is 1 N and 0.02 Mpa, and the maximum output is 5000 N. The reading accuracy is 2 N and 0.01 Mpa. Technical Parameters: Gross weight/net weight: 150kg/85kg Packing size: 1280×400×840mm Voltage power: 220V/15W Maximum test force: When single lever: 1000N When double lever: 6000N Accuracy of indication: ±1% Single lever output ratio: 10/1 Double lever output ratio: 50/1 Loading rate (double lever) : 50N/S Anti-folding fixture Loading roller and support stick diameter: Φ10mm Supporting stick distance: 100±0.1mm Spacer spacing: 46mm
Introduction: This tester is mainly used as a cement plant, construction and construction unit and institutions of professional institutions, scientific research units to do the cement soft training mortar strength test, and can be used as other non-metallic brittle materials flexural strength test. This tester can be used with single lever and double levers. The maximum output when the single lever is used is 1000N, and the maximum force when the double lever is used is 5000N. The scale of the tester has the conversion scale for the flexural strength and resistance of cement soft-formed rubber sand, and the maximum output. For 1000 N, the reading accuracy is 1 N and 0.02 Mpa, and the maximum output is 5000 N. The reading accuracy is 2 N and 0.01 Mpa.
