Introduction: Isostatic pressing is the use of the principle of incompressibility and uniform pressure transfer of a liquid medium to press the powder into a desired geometric shape. Place the product in a closed container and apply the same pressure to all directions of the product. Under high pressure, the product is molded and densified. With the advancement of science and technology, isostatic presses are increasingly used in the formation of rare metal powders such as high-temperature refractory, ceramics, hard alloys, rare earth permanent magnets, and carbon materials. Features: 1. The products made by isostatic pressing have high density and uniformity, high density of embryos, small sintering shrinkage, and not easily deformed. 2. It can form slender rod or tubular pressure rings that are difficult to prepare in the normal pressure process. 3. The product has high strength and good machinability, which can greatly reduce the internal stress. 4. Molds are easy to make, long life, and relatively low cost. 5. Can shape shaped blanks. And each time you can shape a variety of different shapes of blanks. 6. The use of laboratory and small-scale test environment, etc. The price of the instrument is small. 7. The instrument can remove the isostatic cavity and replace the cold-pressing die, which has the characteristics of one machine and two functions. Technical indicators: Specifications Model: DJY-80 type System maximum pressure: 150 tons (about 25MP) Cavity diameter: Φ80mm The maximum stroke of the indenter: 100 mm Tablet holding pressure time: 0~999 seconds Power supply: 380V±10%/50Hz, 16A 3-phase+neutral+ground Rated power: 1.1kw Dimensions: 1540x950x500mm Net weight: about 1800 kg Ambient temperature: 10~40°C