CW-2500T Ultra High Pressure Piston Pressure Gauge
Introduction: The CW-2500T ultra-high pressure piston pressure gauge is used for mass transfer piston pressure gauges, verification and calibration digital pressure gauges and other pressure instruments. The CW-2500T ultra high pressure piston pressure gauge is developed and produced in accordance with the latest national verification regulations JJG59-2007. Features: 1. The piston structure uses our company's latest patent, with stable and reliable performance. 2. The piston area is 0.02 square centimeters, and the weight is lighter with smaller area. 3. With the addition of the anti-breaking device, the user can use it with confidence and no longer worry about the piston rod breaking during normal use, causing huge losses. 4. The limit structure of the piston rod adopts a ring limit, and no limit screws or snap rings are used. This can reduce friction, and the piston rod is evenly stressed during friction and rotates smoothly. 5. One-time pressurization, from the starting point to 250MPa can be achieved with a pressure regulator at one time, without using a pressurizer, making the user's operation more convenient. 6. The stainless steel surface of the countertop is beautiful and durable, and there is no worry about bumps when using it. 7. The piston system is placed on the leftmost side of the table, and the two meter sockets are placed on the right side of the table at the same time. This layout is very reasonable, because the previous piston layout will cause the user to block the piston when the meter is connected. The front of the watch seat, or when the weight is added, the watch seat is blocked in front of the weight, which is very inconvenient to use and affect each other. 8. The piston has a liquid crystal display. Technical parameter: Model: CW-2500T Range: (5~250) MPa Accuracy levels: 0.005, 0.01, 0.02, 0.05 Working medium: sebacate Piston material: Piston rod: Tungsten carbide; Piston barrel: Tungsten carbide Weight configuration: According to user needs, kilogram group or MPa group can be processed and configured with pressure deformation coefficient. Weight correction: correction of gravity acceleration according to the place of use Weight material: non-magnetic stainless steel (grade 0.005; grade 0.01; grade 0.02); carbon steel (grade 0.05) Pressure measurement method: gauge pressure Pressure output: M20×1.5 standard quick coupling Other configurations (optional): pressure sensor, temperature sensor, position sensor, speed sensor
Introduction: The CW-2500T ultra-high pressure piston pressure gauge is used for mass transfer piston pressure gauges, verification and calibration digital pressure gauges and other pressure instruments. The CW-2500T ultra high pressure piston pressure gauge is developed and produced in accordance with the latest national verification regulations JJG59-2007.
