Introduction: The CL-2000G computer Mooney viscosity meter is composed of measurement and control module, platinum resistance and heater. It can automatically track the changes of the grid and ambient temperature, and automatically correct the PID parameters to achieve fast and precise temperature control. The data acquisition system and the electromechanical chain complete the automatic detection of the torque signal during the rubber test process, and automatically display the temperature value and set value in real time. After vulcanization, automatic processing, automatic calculation, printing of Mooney, scorch curve and process parameters. The computer displays the test process in real time, from which the "temperature" change and the "time-menny" change process can be seen at a glance. It is an indispensable instrument in the reclaimed rubber, rubber, wire and cable industry. Features: 1. High temperature control accuracy and wide range. (±0.1 °C) 2. Clock programming function. (setting, modification time) 3, the technology of advanced switching power supply, wide voltage range. 4. Imported integrated circuits and control components. 5, the overall processing of the integrated cavity, the precision is more than several times the cavity of some manufacturers assembled cavity. 6. The square hole of the main shaft is made of high-precision and slow wire processing, and the accuracy control can not be compared with domestic counterparts. Technical Parameters: Implementation standards: ISO28-63, GB/T3242-2005 Measuring temperature range: normal temperature ~200 °C Temperature measurement accuracy: ≤±0.3°C Control accuracy: ≤±0.3°C Temperature resolution: 0.1 ° C Torque range: 0-100 Mooney value Calibration accuracy: 100±0.5 Mooney value Rotor speed: 2 ± 0.02 rev / min Measurement time: 0-200 minutes Resolution 1 second Ambient temperature: 0-35 ° C Relative humidity: <80% Test pressure: 11.5KN±0.5KN Air pressure: 0.45-0.6MPa
Introduction: The CL-2000G computer Mooney viscosity meter is composed of measurement and control module, platinum resistance and heater. It can automatically track the changes of the grid and ambient temperature, and automatically correct the PID parameters to achieve fast and precise temperature control. The data acquisition system and the electromechanical chain complete the automatic detection of the torque signal during the rubber test process, and automatically display the temperature value and set value in real time. After vulcanization, automatic processing, automatic calculation, printing of Mooney, scorch curve and process parameters. The computer displays the test process in real time, from which the "temperature" change and the "time-menny" change process can be seen at a glance. It is an indispensable instrument in the reclaimed rubber, rubber, wire and cable industry.
