Introduction:
It is suitable for measuring the impact toughness of non-metallic materials such as plastic, nylon, rubber, fiberglass, composite plastic pipe, electrical insulating material, etc. and the impact resistance of testing materials in various fields such as machinery, metallurgy, universities and research institutes .
This machine adopts German Siemens PLC to carry on the control, carries on the elevation data acquisition through the high-precision optical encoder, uses the host computer software to carry on the parameter establishment and the data demonstration, automatically carries on the friction loss calibration and the computation to different hammerheads and preserves the numerical value, calculates the impact automatically Intensity and impact on the intensity of data printing. By electric hammer release, with easy operation, safe, reliable, data accuracy and so on. Features:
1, touch screen easy to operate
2, automatically calculate the impact strength
3, electric release hammer
4, automatic calibration of friction loss
5, the program has a variety of hammer configuration, you can add new hammer on the installation through automatic calibration directly after use Technical Parameters:
Simply supported beam:
1, the impact energy: (0.5J / 1J / 2J / 4J 7.5J / 15J / 25J / 50J hammer optional)
2, pendulum impact speed: ≤ 4J: 2.9m / s ≥ 7.5J: 3.8m / s
3, the sample center to the axis of the balance axis distance: 230mm
4, pendulum pre-Yang: 150 °
5, Allow sample length: 40mm, 60mm, 62mm, 70mm, 95mm
6, allowing the sample width: 4mm-15mm
7, allowing the thickness of the sample: 3mm-10mm
8, support blade fillet radius: R = 1mm
9, impact blade angle: 30 °
10, Impact blade fillet radius: R = 2mm
11, voltage 220V
12, hammer release: electric release
Cantilever:
1, the impact energy: (1J / 2.75 / 5.5J / 11J / 22J optional hammer)
2, pendulum impact speed: V = 3.5m / s
3, the sample center to the axis of the balance axis distance: 335mm
4, pendulum pre-Yang: 150 °
5, Allow sample length: 63.5mm ± 2 80 ± 2mm
6, Allow sample width: 12.7 ± 0.2 mm 10 ± 0.2 mm
7, allowing the thickness of the sample: 3.2-12.7mm
8, fillet radius: R = 0.8m
9, power supply: 200W
10, hammer release: electric hammer
Introduction:
It is suitable for measuring the impact toughness of non-metallic materials such as plastic, nylon, rubber, fiberglass, composite plastic pipe, electrical insulating material, etc. and the impact resistance of testing materials in various fields such as machinery, metallurgy, universities and research institutes .
This machine adopts German Siemens PLC to carry on the control, carries on the elevation data acquisition through the high-precision optical encoder, uses the host computer software to carry on the parameter establishment and the data demonstration, automatically carries on the friction loss calibration and the computation to different hammerheads and preserves the numerical value, calculates the impact automatically Intensity and impact on the intensity of data printing. By electric hammer release, with easy operation, safe, reliable, data accuracy and so on.
