Position: Home > > Optical instruments and equipment > Industrial microscope > Tool microscope > 19JPC-V universal tool microscope (image type) for Complex measurement

19JPC-V universal tool microscope (image type) for Complex measurement

Product ID:GGXgj006

Price: Please inquire PDF Format
Supply Ability:20SETS/MON
Port:SHENZHEN
share:
  • Product Introduction
  • Consulting
  • Model Number19JPC-V
    Brand NameBEIJINGSHANGGUANG
    Payment TermsT/T, paypal
    19JPC-V universal tool microscope (image type)
     
    Introduction:
           The 19JPC-V Image Universal Tool Microscope is a new generation of universal tool microscopes that use computer-aided measurements to solve complex measurement problems. The traditional Wangong display is difficult to measure geometric elements that cannot be directly observed in the field of view, such as the center of the circle, the midpoint, the intersection, the center line and their mutual distance, the angle, etc., but on the 19JPC-V instrument. Can be solved. The instrument uses a precision grating sensor, a PC series microcomputer and a data interface card to collect measurement data and a camera system. The image measurement software is used to process the computer two-dimensional image to display and print the measurement results. The instrument is easy to operate. The instrument uses both metric and imperial units of measurement. The calculation accuracy is 0.0001 mm and 0.0001 inch, respectively. The instrument can automatically correct the assembly error of the slide guide of the table, which further improves the measurement accuracy.
           The 19JPC-V image type universal tool microscope is based on the 19JPC microcomputer type universal tool microscope and uses computer image processing technology to process the measurement data. The image measurement software has a crosshair aiming system that flashes and discolors when the crosshair encounters the target being measured for precise aiming. The instrument is a multi-purpose measuring instrument widely used in machinery, electronics manufacturing, and metrology testing. Can be used to measure the size, shape, angle and position of any part within the range. At the same time, there are two sets of reading systems for computers and digital display boxes.
    Typical measurement object:
    1. Measure the shape of various molded parts such as prototypes, model turning tools, template milling cutters, dies and cams.
    2. Measure the medium diameter, small diameter, pitch and half angle of the external thread (thread plug gauge, screw and worm).
    3. Measure the lead, tooth profile and profile angle of the gear hob.
    4. Measure the position of the hole on the circuit board, the drill or the orifice plate, the symmetry of the keyway, and other geometrical errors.
    5. The main microscope is equipped with a variety of eyepieces and objective lenses, which have a large field of view and clear imaging.
    6. The instrument adopts photoelectric digital display and image technology, and uses precision grating as the measuring component. Using advanced computer technology, the length signal collected by the grating digital display system is input into the computer in real time. There are dedicated two-dimensional measurement software and image measurement software to process data and image according to user requirements, and print out the results or graphics, which is accurate and efficient.
    7. The main microscope can be yawed left and right for measuring spiral parts.
    8. Non-contact measurement is the basic method, transparent and reflective illumination, which can test parts with complex geometry.
     The accessories are complete and the use is wide.
    Instrument parameters:
     X, Y coordinates
     Measuring range: 200×100mm Divided value: 0.0005mm
     Aiming microscope
    Lifting stroke: 120mm
                  Force arm tilt range: 15 degrees left and right. Graduation value: 10'
                  Illumination diaphragm adjustment range: φ3 ~ φ32mm division value: 1mm
    Angle goggles
    Angle measurement range: 360° division value: 1′
    Contour eyepiece
    Angle measurement range: ±7° division value: 10′
                Circular reticle: Curvature radius: R0.1100mm
                Threaded reticle: Ordinary thread pitch t = 0.25 - 6mm
                                       
     Trapezoidal thread pitch T = 2 - 20mm
    Optical indexing head Measuring range: 360° Graduation value: 1′
    Optical positioner Probe diameter: Φ3±0.1mm
                                       (The limit error of the actual diameter value is not more than 0.5μm)
    Measuring force: 0.1±0.03N
    Maximum measuring depth: 15mm
      Glass workbench
       Glass countertop size: 215×130mm
      Thimble frame Maximum clamping diameter: Φ100mm
       Maximum clamping length: When the diameter of the tested part is ≤ 55mm: 750mm
                                           When the diameter of the tested piece is > 55mm: 600mm
      High thimble frame
     Maximum clamping diameter: Φ180mm
     Maximum clamping length: 600mm
      V-frame Left and right V-frame front and rear adjustment range: 5mm front and rear
                   Right V-shaped frame height adjustment range: up 15mm; down 3mm
      Maximum load capacity 40kg
  • Introduction:
           The 19JPC-V Image Universal Tool Microscope is a new generation of universal tool microscopes that use computer-aided measurements to solve complex measurement problems. The traditional Wangong display is difficult to measure geometric elements that cannot be directly observed in the field of view, such as the center of the circle, the midpoint, the intersection, the center line and their mutual distance, the angle, etc., but on the 19JPC-V instrument. Can be solved. The instrument uses a precision grating sensor, a PC series microcomputer and a data interface card to collect measurement data and a camera system. The image measurement software is used to process the computer two-dimensional image to display and print the measurement results. The instrument is easy to operate. The instrument uses both metric and imperial units of measurement. The calculation accuracy is 0.0001 mm and 0.0001 inch, respectively. The instrument can automatically correct the assembly error of the slide guide of the table, which further improves the measurement accuracy.
           The 19JPC-V image type universal tool microscope is based on the 19JPC microcomputer type universal tool microscope and uses computer image processing technology to process the measurement data. The image measurement software has a crosshair aiming system that flashes and discolors when the crosshair encounters the target being measured for precise aiming. The instrument is a multi-purpose measuring instrument widely used in machinery, electronics manufacturing, and metrology testing. Can be used to measure the size, shape, angle and position of any part within the range. At the same time, there are two sets of reading systems for computers and digital display boxes.
Products
Analytical instruments
Physical property test
Environmental monitoring and analysis
Lab general equipment
About us
About this website
Our service
Product purchase
Contact Us

Newsletter

Make Sure you dont miss interesting happenings by joining our newsletter program.

Contact Us
18620722006
instruments@instrumentstrade.com